Front End Operator
Company: Crown, Cork & Seal (USA), Inc.
Location: Cheraw
Posted on: October 10, 2024
|
|
Job Description:
Safety & Quality minded with willingness for excellence required
Ensures all safety equipment, guards, and devices are in place at
all times, and follows safe work procedures and safety rules Checks
a set of cups on shift to make sure the problem is not being
created by the plant Checks the coil for dents and holes during
changeover before rotating mandrels into position to be threaded
into cupper. Installs the coil being loaded on the off mandrel in
an overlap position which should be facing in the opposite
direction during the changeover Rotates the coil around, while the
machine is in manual mode, by using the unwinder during the
changeover. Inspects cups once per shift to visually detect defects
such as excessive earlng, score marks, ID visibility, pinching,
thining of cup at radius, lube and hairing. Shuts down machine when
defective can is detected Identifies cups by recording date and
shift on bottom of cuts, before sorting cups in sorter of station
on process control board. Removes scraps from die of press before
starting machine. Pulls 5 consecutive samples for an equipment
set-up evaluation from bodymaker after tooling change has been
verified. Adds oils to ironers as needed for proper operation.
Adjust dome for depth, to meet customer specifications. Clears jams
from bodymaker and trimmer Conducts daily or monthly lubrication on
ironers for normal operation of equipment. Identifies trim quality
problems. Checks three cans of trimmer every two hours for
dimension Identifies the proper size rings to ensure customer
specifications are met Sets timing for cup infeed, can blowoff and
discharge pocket for bodymaker Operates the ironers and trimmers
during daily production runs. Adjust trim heights to Crown's
specifications for finish. Checks cup elevator for damage or scrap
cups after a die jam Performs other related duties as required High
school diploma or equivalent experience 2-4 years
manufacturing/production experience Good oral and written
communications skills. Good record keeping skills. Good listening
skills. Accurate measurement capability. Ability to understand and
speak basic English. While performing the duties of this job, the
associate is regularly required to stand, use hands, and reach with
hands and arms. The associate is required to walk, stoop, kneel,
crouch, or crawl. The associate may be required to sometimes sit,
climb or balance. The associate may lift and/or move up to 50
pounds repetitively. Specific vision abilities required by this
position includes close vision, peripheral vision, and ability to
adjust focus. While performing the duties of this job, the
associate is regularly exposed to moving mechanical parts. The
associate is occasionally exposed to fumes. The associate may be
exposed to a wide range of temperatures. The noise level is usually
loud. Reasonable accommodations may be made to enable individuals
with disabilities to perform essential functions. --s-p-m1-- By
applying, you consent to your information being transmitted by
Monster to the Employer, as data controller, through the Employer's
data processor SonicJobs. See Crown Cork and Seal Terms &
Conditions at https://www.crowncork.com/legal-notice and Privacy
Policy at https://www.crowncork.com/privacy-policy and SonicJobs
Privacy Policy at https://www.sonicjobs.com/us/privacy-policy and
Terms of Use at https://www.sonicjobs.com/us/terms-conditions
Keywords: Crown, Cork & Seal (USA), Inc., Rock Hill , Front End Operator, Other , Cheraw, South Carolina
Click
here to apply!
|